Safety Notes - AMQ ACTIV DT Riser Assembly Manual

DUAL MONITOR MOUNT
Step 1
Use M6X12 screws (x4) to attach the dual
monitor mount to top of the column.
Step 3
Use the M6X10 hand screws (x4) to fasten
monitor holder to dual monitor mount through
the horizontal cut-outs in the mount.

! SAFETY NOTES:

1. For dual monitor mount, the maximum allowable size for
each monitor is 24" wide, and the total maximum weight
capacity for both monitors is 20 lbs.
2. For safety and structural integrity, always install
keyboard tray first if it's to be included in the assembly.
ACTIV DT RISER ASSEMBLY GUIDE | 6
M6X12
Step 2
Prior to installing the monitors to the unit, use
the monitor mount screws from your monitor
to attach the VESA plates to each respective
monitor.
Note: Single monitor holder is re-used for the
dual monitor mount assembly.
M6X10
hand screw
amqsolutions.com