Troubleshooting - pro.point 8678963 User Manual

V1.0
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Maintain the tool's labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
CLEANING
The spindle sander will generate dust particles. Even if a dust
collection system is connected to the tool, some dust will remain.
Remove the table insert and dust washer from the spindle
and clean the internal mechanism and motor housing with
compressed air or a vacuum.
Clean the work table and table insert with a moist rag to
remove any deposits.
LUBRICATION
Inspect and lubricate the tool when required. Only use light oil
to lubricate the tool. Other lubricants may not be suitable and
could damage the tool or cause a malfunction during use.
The spindle's bearings (#63) are grease packed and do not
need lubrication.

TROUBLESHOOTING

Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
Visit www.princessauto.com for more information
SPINDLE SANDER 8678963
13