Table of Contents
Advertisement
Available languages
Available languages
8349821
TROUBLESHOOTING
Contact Princess Auto Ltd. for a solution if the tool does not
function properly or parts are missing. If unable to do so, have a
qualified technician service the tool.
Problems
Tool runs at
normal speed,
but loses
power under
load.
Tool runs
slowly. Air
flows slightly
from exhaust.
Visit www.princessauto.com for more information
HEAVY DUTY STRAIGHT LINE AIR SANDER
Possible Causes
Motor parts worn.
Motor parts
jammed with
dirt particles.
OR
Airflow blocked
by dirt.
Air regulator in
closed position.
Suggested Solutions
Contact Princess Auto Ltd.
for a solution. If unable
to do so, have a qualified
technician service the tool.
1. Check air inlet filter
for blockage.
2. Pour air tool
lubricating oil into air
inlet as per Lubrication
instructions.
3. Operate tool in
short bursts.
4. Repeat above as
needed. If this fails,
contact Princess Auto
Ltd. for a solution.
Open the air regulator to
desired airflow.
V 3.04
11
Advertisement
Table of Contents
