Table of Contents
Advertisement
Available languages
Available languages
V1.0
POLARIZED PLUG
Double insulated tools eliminate the need for a 3-wire
grounded power cord and grounded power supply system. The
tool is equipped instead with a polarized plug that requires a
polarized outlet/power supply.
1.
A polarized plug has two blades of different widths,
allowing only one way to insert the plug into the outlet.
2.
If the outlet does not accept a polarized plug, contact
a qualified electrician to install a polarized outlet. Do
not alter the plug as this may compromise the built-in
safety feature.
POWER CORD
1.
Insert the power cord plug directly to the power supply
whenever possible. Use extension cords or surge protectors
only when the tool's power cord cannot reach a power
supply from the work area.
1.1 Use in conjunction with a Ground Fault Circuit
Interrupter (GFCI). If operating a power tool in a damp
location is unavoidable, the use of a GFCI reduces the
risk of electric shock. It is recommended that the GFCI
should have a rated residual current of 30 mA or less.
2.
Do not operate this tool if the power cord is frayed or
damaged as an electric shock or surge may occur, resulting
in personal injury or property damage.
2.1 Inspect the tool's power cord for cracks, fraying or
other faults in the insulation or plug before each use.
2.2 Discontinue use if a power cord feels more than
comfortably warm while operating the tool.
2.3 Have the power cord replaced by a qualified
service technician.
3.
Keep all connections dry and off the ground to reduce the
risk of electric shock. Do not touch plug with wet hands.
Visit www.princessauto.com for more information
SPINDLE SANDER
8678963
7
Advertisement
Table of Contents
