Table of Contents
Advertisement
Available languages
Available languages
8678963
SPINDLE SANDER
SPECIFICATIONS
Material
Horsepower
No Load Speed
Oscillations
Maximum Sanding Height
Spindle Diameter
Weight
Current Rating
Voltage Rating
Frequency Rating
INTRODUCTION
The benchtop mount spindle sander quickly shapes and
finishes curved, contoured and irregular shaped projects. It
comes with a variety of table inserts and sanding drums. The
dust collection port can be connected to a dust collection
system to minimize sawdust.
SAFETY
WARNING! Read and understand all instructions before using
this tool. The operator must follow basic precautions to reduce
the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
2
SPINDLE SANDER
Cast Iron Table
1/2 HP
2,000 RPM
58 Oscillations per minute with 5/8
in. (16 mm) of travel.
3-5/8 in. (90 mm)
1/2 in.
34 lb 5 oz (10.2 kg)
3.5A
120VAC
60 Hz
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
