Billion BiPAC 7300GX Quick Start Manual page 6

3g/adsl2+ wireless router

Hide thumbs Also See for BiPAC 7300GX:

Quick Start Guide

3. ADSL Connection

Connect the supplied RJ-11 phone cable to the router's ADSL port, and the other

side to the phone jack on the wall.

4. Splitter/ Micro-filter Connection

Splitter / Micro-filter are important for ADSL installation. High-frequency signals are

directed to the ADSL modem, and low-frequency signals are directed to the

telephone or other analog voice-channel device to prevent inter-modulation

distortion and also to get good speed and stable ADSL sync rate.

a) Splitter connection

If the installation has only a single telephone and a single ADSL modem, then a

splitter can be employed.

b) Micro-filter connection

If the installation has several telephones or other analog devices, then an internal

micro-filter can be employed at each analog device.