Related Manuals for Billion BiPAC 7800DXL
Summary of Contents for Billion BiPAC 7800DXL
- Page 1 BiPAC 7800DXL Dual-Band Wireless-N 3G/4G LTE ADSL2+ Router Quick Start Guide...
-
Page 2: Package Contents
Billion BiPAC 7800DXL Dual-Band Wireless-N 3G/4G LTE ADSL2+ Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON CD-ROM. -
Page 3: The Front Leds
Quick Start Guide The Front LEDs Lit red when WAN port fails to get IP address; lit green when When the system is ready, WAN port gets IP address Lit green when wireless the LED will be lit green; lit successfully. - Page 4 Billion BiPAC 7800DXL Dual-Band Wireless-N 3G/4G LTE ADSL2+ Router ADSL Router Mode Broadband Router Mode 3G/4G LTE Router Mode...
- Page 5 Quick Start Guide 1. Power Connection Plug the supplied power adapter to the wall jack and the other side to the router. Please note that the plug type may differ according to different country. 2. LAN Connection Connect the supplied Cat. 5e STP RJ-45 Ethernet cable to one of the Gigabit Ethernet ports, and the other side to the PC’s Ethernet interface.
- Page 6 Billion BiPAC 7800DXL Dual-Band Wireless-N 3G/4G LTE ADSL2+ Router 2) The USB 2.0 port supports 3G/4G LTE modem connectivity ：Users can conveniently access Internet via 3G/4G LTE, eliminating the limitations of the wired network. This solution also employs an auto fail-over feature to ensure always-on connectivity for SOHO users.
- Page 7 Quick Start Guide 6. Splitter/ Micro-filter Connection The Splitter / Micro-filter are important for ADSL installation, they help direct high-frequency signals to the ADSL modem & low frequency signals to the telephone or other analogue device to prevent inter-modulation distortion & get good speed/stable ADSL sync rate.
- Page 8 Billion BiPAC 7800DXL Dual-Band Wireless-N 3G/4G LTE ADSL2+ Router Please see the relevant sections of user manual for detailed instructions on how to configure your router. 1. None of the LEDs are on when you turn on the router. Check the connection between the adapter and the router. If the error persists, you may have a hardware problem.