Care And Maintenance - Labnet 25 Operating Instructions

Copyright November 1999, Labnet International Inc.
All rights reserved.
Reproduction without prior written permission is prohibited.
Information contained herein subject to change without notice.

Care and Maintenance

After each use, the Model 25/25D Benchtop Rocker should be wiped
down with a soft, damp cloth. Do not immerse the rocker in water or
pour liquids over the unit as electrical shock may occur.
.
Accessories
The following accessories are available for the Model 25/25D
Benchtop Rocker:
Extra Rocking platform* with securing hardware
Platform tie downs
*Used to convert single platform unit to double platform unit. (Unit
can not be used with more than two platforms.)
Items may be ordered through you local Labnet International dealer
or by calling Labnet's Customer Service Department at 732 417-
0700 (fax 732 417-1750).
Where to Call
I
f you have a question about the Model 25/25D Benchtop rocker con-
tact Labnet International's Customer Service Department at 732 417-
0700, Monday through Friday, 8:30am to 5:30pm, EST.
For service inquiries, contact Labnet International's Service Depart-
ment at 732 417-0700, Monday through Friday, 9:00am to 5:00pm,
EST. Before returning a unit for service, a Return Authorization (RA)
number must first be obtained from the service department. Equip-
ment sent in without prior authorization will be returned at the
customer's expense.
If the unit must be returned to Labnet International for servicing, it
should be sent in the original packaging. If this is not possible, be
sure that the unit is sufficiently packed. Any damage resulting from
improper packaging is the responsibility of the customer. A written
explanation should accompany the unit along with the return autho-
rization number.
S-2025P
S-2025B
5