Quick Start Of Ti Cc2530 - Banana Pi BPI-G1 Manual

Quick start of TI CC2530
Quick start of TI CC2530
Download and install the following software：
1. ZStack-CC2530-2.5.1a（Can go to google search to）
Assuming the default installation folder C:\Texas Instruments\ZStack-CC2530-2.5.1a
After installation is complete, go https://github.com/mark-legend/bpi_g1_zigbee_patch download hal_lcd.c file and
overwrite the folder C:\Texas Instruments\ZStack-CC2530-2.5.1a\Components\hal\target\CC2530EB file with the
same name
2. IAR EW8051（The software is compiled BLE's IDE is the same, if you have installed, then the direct use, otherwise
the installation yourself, we recommend using IAR EW8051 8.1)
G1 connection BPI open debugger burn board
BPI open debugger check whether the software and hardware are connected
BPI open debugger board connected to the PC, and check whether the drive is installed, if you can not identify, install
SmartRF Studio，The software that comes with the driver. If you can identify that, please give G1 powered.
45