Table of Contents
Advertisement
Quick start of TI CC3200
Check whether the connected BPI open debugger board:
BPI open debugger connected to the PC, and check whether the drive is installed, if you can not identify, install TI
UNIFLASH, the programming software that comes with the driver. If you can identify that, please give G1 on electricity.
Cover IAR debugger interface file
Copy the file C:\TI\CC3200SDK_1.0.0\CC3200-sdk\tools\iar_patch\armLMIFTDI.dll to folder C:\Program Files (x86)\IAR
Systems\Embedded Workbench 7.0\arm\bin (Select be covered).
Recompile SimpleLink library files
1. Start the IAR and select File>Open>Workspace from the menu..
36
Advertisement
Table of Contents
