Table of Contents
Advertisement
Quick start of TI CC2540\/1
If the connection is normal, then the status light next to the CC Debugger interface will turn green, if it is red or other colors,
please check whether it is normal or electricity on the G1 G1 is properly connected and Open debugger.
Compile, download and debug routines SimpleBLEPeripheral
1. IAR EW8051 SimpleBLEPeripheral start and open the project, select File> Open from the menu> Workspace.
2. Browse to C:\Texas Instruments\BLE-CC254x-1.3.2\Projects\ble\SimpleBLEPeripheral\ CC2540DB and open
SimpleBLEPeripheral.eww.
41
Advertisement
Table of Contents
