OPERATION
Description. The access to and adjustment of these
functions is described below:
Mode
MANUAL
AUTOMATIC
PROGRAM-
CRONO
The product also has the following supplementary
functions.
Function
In which mode it
can be activated
STAND BY
automatic
crono
RELAX
manual
automatic
24
crono
NIGHT
manual
automatic
OPTIONAL CONNECTIONS
The technician can supply, on request:
external thermostat, phone dialler to be connected to
clean contact (AUX) on the terminal board.
USER INSTRUCTIONS
Size settings
•
power level
•
ventilation level
•
desired room temperature
•
ventilation level
•
desired room temperature,
selected per day of the week
•
ventilation level
What it does
when the desired
temperature
reached, the product
shuts off and turns
on again when the
temperature drops
enables
convection
(fan
off),
reducing the power
allows you to set the
fireplace to go out
after a given number
of hours
PHASES
Further to the above operational procedures, the
product has the following phases
- Ignition (display reads ON ) Flame ignites and
grows stable
This is the result of:
•
manual ignition with ignition button
•
request from Crono
•
power request during stand by
•
request from external contact
Ignition has a variable duration, with the aim of reaching
the start temperature
- Switch-off (display reads OFF )
The flame is extinguished and the fireplace cools
down.
This is the result of:
•
manual switch-off with switch-off button
•
power demand ceases with Stand by function
active
•
request from Crono
•
request from external contact
is
Switch-off has a variable duration, with the aim of
reaching the stop temperature
- Shutdown
Switches the fireplace off in response to an alarm
natural
In case of malfunction, a key is available for switching
the fireplace on and off and setting the temperature
mode
(without visual indication except for the flame itself)
thus
INTERFACE
The user interface is the remote control but, if this is not
available, you can control the product with the button
on the loading hatch
1. WITH THE PRODUCT OFF
press the button for 2" to turn the fireplace on.
2. WITH THE PRODUCT ON
press the button for 2" to turn the fireplace off.
3. WITH THE PRODUCT ON IN MANUAL MODE
press the button to increase its output power