Night (Deferred Switching On/Off); Activating The Night Function; Load Pellets; Setting The Hours - EdilKamin PELLKAMIN 12 Installation, Use And Maintenance Manual

Night (deferred switching on/off)

This function switches the product on/off after a set
period from activation of the function.
This is convenient if you go to bed and want the product
to switch on/off after a few hours (12 hours maximum).

Activating the Night function

To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing OK.
Use the "+/-" buttons to activate/deactivate the
function.
To exit without saving, press the "M" button.
Confirm by pressing the "OK" button for two seconds.

Setting the hours

Press "+" to increase the duration.
To exit without saving, press the "M" button.
Confirm by pressing the "OK" button for two seconds.
Press ON/OFF to return to the main screen.
With the Night Function active, the display shows the
moon in the top left corner.
To quit the function, return to the menu and set the
Night function to Deactivated. The procedure is the
same as for activation.
MENU
32

LOAD PELLETS

STAND BY
CRONO
NIGHT
LANGUAGE
DATE-TIME
DISPLAY
BEEP
INFO
TECHNICAL MENU
NIGHT
OFF
ON
USER INSTRUCTIONS
NIGHT NIGHT
OFF
OFF
ON
ON
NIGHT
OFF
ON
Load Pellets
Allows you to load pellets after the screw feeder has
emptied following a no-pellets alarm.
Useful for the technician during commissioning.
Available only in the OFF state. If you attempt to activate
the function in other states, access is not granted.
To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing OK.
Use the "+/-" buttons to activate/deactivate the
function.
Press "M" to quit without saving.
Confirm by pressing the "OK" button for 2 seconds
LOAD PLTS
MENU
LOAD PELLETS
OFF
STAND BY
ON
CRONO
NIGHT
LANGUAGE
DATE-TIME
DISPLAY
BEEP
INFO
TECHNICAL MENU
Language
Selects the language.
This displays the first time the remote control is
activated with the product powered on, or by selecting
the option from the menu.
To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing OK.
Use the "+/-" buttons to select the language.
To exit without saving, press the "M" button.
Confirm by pressing the "OK" button for two seconds.
MENU
LOAD PELLETS
STAND BY
CRONO
NIGHT
LANGUAGE
DATE-TIME
DISPLAY
BEEP
INFO
TECHNICAL MENU
LOAD PLTS
OFF
ON
LANGUAGE
ENGLISH
ITALIANO
FRANCAIS
DEUTSCH
ESPANOL
PORTUGUES
NEDERLANDS
DANSK