Softkeys - Oricom MX1100G Instruction Manual

■

■ Softkeys

Frequently used functions are assigned to the softkeys [
functions' icons are displayed above the softkeys [
Push [ B ]
Push [ B ]
Push [ B ]
NOTE: The displayed icons or their order may differ depending on software
version. When the MMSI code is not set, the softkeys for DSC function are not
displayed.
■
◆ Using the Softkeys
Press [◄] or [►] to scroll through the selectable functions that are assigned to the
]. Press the softkeys [
softkeys [
function.
■
◆ Softkey Functions
The softkey functions that can be implemented are as follows:
] for easy access. The
], as shown below.
Push [ A ]
Push [ A ]
Push [ A ]
] under the functions's icon to select the
1.■ Distress Call [
]
Press to display the "DISTRESS" screen, to select the Nature of distress, then
to make a call.
• "
" is displayed.
NOTE: NEVER make a distress call if your ship or a person is not in an emer-
gency. A distress call should be made only when immediate help is needed.
2.■ Other DSC [
]
Press to select DSC CALL, including Individual Call, Group Call, All Ships Call,
Test Call.
• "
" is displayed.
3.■ Task List [
]
Press to display Task List.
4.■ Scan [
]
Press to start or stop Normal Scan or Priority Scan.
5.■ Dualwatch/Tri-watch [
]
Press to start or stop Dualwatch/Tri-watch.
6.■ High/Low Power [
]
Press to set output power to high or low.
• Some channels are set to low power only.
7.■ Channel/Weather Channel [
Press to select regular channels or Weather Channel.
• The Weather Channel is for USA and Australian versions only. "
displayed for other versions.
• While the Call channel or Channel 16 is displayed, press this key to return to
regular channel mode.
8.■ Attenuation [
]
Press to turn the Attenuator ON or OFF.
]
" is
5