Dimensions - Oricom MX1100G Instruction Manual

Vhf marine radio, ingress protected to ipx7, independent class b dsc dedicated receiver, speaker vibration draining function, built-in gps receiving module
Table of Contents

Advertisement

5.■ DC Power Connector
Red - Positive(+), Black - Negative(-).The output voltage of the connected DC
power supply must be 13.8V, do not connect the radio to a 24V storage power
supply. If the current supplied to the radio is insufficient, the display may darken
during transmission or the transmitting output power may drop significantly.
NOTE: Connect the DC power cable to a 13.8V DC power supply. Note: make
sure the correct polarity is observed, connect red cable to positive (+) and black
cable to negative (-) terminals.
◆ Fuse Replacement
One fuse is installed in the supplied DC power cable. If a fuse blows or the radio
stops functioning, track down the source of the problem first, then replace the
damaged fuse with a new, rated one.
NOTE: Please power off radio before replacing the fuse, the required fuse is
DC15A/32V.

■ Dimensions

Unit: mm
155
137
155
35
3

Advertisement

Table of Contents
loading

Table of Contents