Table of Contents
Advertisement
Position Input
Individual ID
Group ID
Auto Acknowledgement
Channel Auto Switch
DSC Settings
Data Output
Alarm Status
Channel 70 Squelch Level
Self-Test
Multi-Task
ATIS ON/OFF
ATIS Settings
ATIS ID Input
MMSI Code
ATIS Code
Radio Info (Inquiry
MMSI, ATIS and
Ver. Info)
GPS Version
Firmware Version
Hardware Version
36
Position Input
19
Individual ID
20
Group ID
21
Auto ACK
22
CH Auto SW
22
Data Output
22
Alarm Status
22
CH 70 SQL Level
23
Self-Test
23
Multi-Task
23
ATIS ON/OFF
19
ATIS ID Input
19
MMSI
ATIS (Displays only
when ATIS function is
activated)
-
GPS Ver
Firm Ver
Hard Ver
■
■ Radio Settings
No.
Setting Items
1
SCAN TYPE
Normal Scan
Priority Scan
2
SCAN TIMER
ON/OFF
3
DUAL/TRI-WATCH
Dualwatch Tri-watch
4
CHANNEL GROUP
USA/ INT/ CAN
5
CALL CHANNEL
Channel 00~P3
6
WX ALERT
ON with Scan/ ON/OFF
7
FAV SETTINGS
Set All Channels/Clear All
Channels/Set Default
8
FAV ON MIC
ON/OFF
9
CH DISPLAY
3 Digits/ 4 Digits
10
CH CLOSE-UP
ON/OFF
■
◆ Scan Type
The radio has 2 scan types: Normal Scan and Priority Scan.
•■Normal Scan: Scans all favourite channels in the selected channel group.
•■Priority Scan: Sequentially scans all favourite channels while monitoring Channel
16.
■
◆ Scan Timer
Scan Timer can be set as OFF or ON.
When set to OFF, when a signal is detected on a channel, the scan pauses until the
signal disappears, and then resumes.
When set to ON, when a signal is detected on a channel, the scan pauses for 5
seconds, and then resumes. If the signal disappears in less than 5 seconds, the
scan immediately resumes.
Setting Options
Defaults
Normal Scan
OFF
Dualwatch
USA
Channel 09
OFF
----------------
OFF
3 Digits
OFF
Advertisement
Table of Contents
