Table of Contents
Advertisement
■
◆ Receiving an Group Call
When a Group call is received:
• The alarm sounds for 2 minutes.
• "RCVD GROUP CALL" is displayed.
1. Press softkey [
• The channel that is assigned by the caller is automatically selected after 10
seconds by default.
2. Press the softkey for the next operation.
→ Press [
■
]: Ingores the call and returns to the operating screen.
• "
"
blinks continuously until you display the call message.
• The call
is saved in the DSC Log.
→ Press [
■
]: Pauses the countdown until the assigned
matically selected.
] is not displayed if the "CH Auto SW" item is set to "Manual".
NOTE: [
• Select [
] to resume the countdown.
• The call is saved in the DSC Log.
→ Press [
]: Accepts the call.
• The assigned channel is automatically selected.
• The call is saved in the DSC Log.
→ Press [
]: Closes the Group call, then returns to the operating screen.
→ Press [
]: The receiver call's information is displayed.
] to turn OFF the alarm.
channel is auto-
■
■ All Ships Call
An All Ships call enables you to announce a message to all the ships within range.
■
◆ Sending an All Ships Call
1. Press softkey [
NOTE: You can also display the "OTHER DSC" screen by selecting the "DSC
Call" item on the Menu screen.
2. Select "Type", then press [OK], "MESSAGE TYPE" is displayed.
3. Select "All Ships", then press [OK] or softkey [
• Returns to the "OTHER DSC" screen.
4. Select "Category", then press [OK].
5. Select a category of the call, then press [OK] or softkey [
6. Select "Channel", then press [OK].
7. Select a channel to assign, and then press [OK] or softkey [
• The assigned channels are preset by default.
], the "OTHER DSC" screen is displayed.
].
].
].
25
Advertisement
Table of Contents
