Table of Contents
Advertisement
8. Press softkey [
] to send the All Ships call, "Transmitting All Ships Call" is
displayed, and then the assigned channel is automatically selected.
NOTE: If Channel 70 is busy, the radio stands by until the channel becomes
clear.
9. Hold down [PTT] to communicate.
■
◆ Receiving an All Ships Call
When an All Ships call is received:
• The alarm sounds
• "RCVD ALL SHIPS CALL" is displayed.
1. Press softkey [
• The channel that is assigned by the caller is automatically selected after 10
seconds by default.
26
] to turn OFF the alarm.
2. Press the softkey for the next operation.
→ Press [
■
]: Ingores the call and returns to the operating screen.
• The call is saved in the DSC Log.
• "
" blinks continuously until you display the call message.
■
→ Press [
]: Pauses the countdown until the assigned channel is auto-
matically selected.
] is not displayed if the "CH Auto SW" item is set to "Manual".
NOTE: [
→ Press [
■
]: Accepts the call.
• The assigned channel is automatically selected.
• The call is saved in the DSC Log.
→ Press [
■
]: Closes the All Ships call, then returns to the operating screen.
→ Press [
■
]: The receiver call's information is displayed.
■
■ Position Request Call / Polling Request
Call
When you want to know information about the current location of a ship, you can
send a Position Request call.
Advertisement
Table of Contents
