Configuration - Oricom MX1100G Instruction Manual

Vhf marine radio, ingress protected to ipx7, independent class b dsc dedicated receiver, speaker vibration draining function, built-in gps receiving module
Table of Contents

Advertisement

◆ Dualwatch/Tri-watch
Select Dualwatch or Tri-watch, see corresponding chapter for details.
◆ Channel Group
Select the suitable channel group for your operating area, including USA, INT, CAN
Channel Group.
◆ Call Channel
You can change your Call channel.
◆ WX Alert
When there is any important weather information, an NOAA broadcast station trans-
mits a Weather Alert tone. While WX Alert function is ON, "
instead of "WX". When detecting an alert, an alarm sounds and "
•■ON with Scan: The preset Weather channels are sequentially checked while
scanning.
•■ON: The previously selected (last used) Weather channel is checked while scan-
ning.
•■OFF: The Weather Alert tone is not detected.
◆ FAV Settings
You can set all channels as favourite channels, clear all settings, or reset to default.
By default, some channels are preset.
•■Set All Channels: Sets all channels as favourite channels.
•■Clear All Channels: Clears all favourite channels.
•■Set Default: Resets favourite channels to the default.
◆ FAV on MIC
You can select the channel set when you press [▲]/[▼] on the supplied microphone.
◆ CH Display
• You can select the number of digits to display the channel number, 3 Digits or 4
Digits.
◆ CH Close-up
You can select whether or not to display the channel name when changing the oper-
ating channel. While the function is ON, when you press [▲]/[▼] to select channels,
the selected channel number and name will display for 1 second, then return to
normal screen.

■ Configuration

Items
BACKLIGHT
DISPLAY CONTRAST
KEY BEEP
" is displayed
" blinks.
KEY ASSIGNMENT
UTC OFFSET
INACTIVITY
TIMER
GPS
◆ Backlight
You can adjust the backlight brightness between 1 and 7, or OFF. When backlight
function is ON, press any key (except for [PTT]), the backlight ON.
◆ Display Contrast
You can adjust the display contrast level between 1 (lowest) and 8 (highest).
Options
7 Levels/ OFF
Level 1~8
ON/ OFF
Softkey 1~16
-14:00~+14:00
Not DSC
Off, 1-15 min
DSC
Off, 1-15 min
Distress
Off, 1-15 min
RT
10/30 sec, 1~10 min
GPS
ON
GLONASS
ON/ OFF
SBAS
ON/ OFF
Defaults
Level 4
Level 3
ON
SCAN, DW/TW, CH/WX,
H/L, ATT, VIB, TAG, NAME,
BL, LOG
00:00
10 min
15 min
OFF
30 sec
ON
ON
OFF
37

Advertisement

Table of Contents
loading

Table of Contents