Channel Group Selection; Channel Selection - Oricom MX1100G Instruction Manual

■

■ Channel Group Selection

Channel Groups are pre-programmed.
1. Press [MENU] key, the menu interface is displayed.
2. Press [▲]/[▼] or rotate [DIAL] knob to select "Radio Settings", then press
[OK], the "RADIO SETTINGS" screen is displayed.
3. Press [▲]/[▼] or rotate [DIAL] knob to select "Channel Group", then press
[OK], the "CHANNEL GROUP" screen is displayed.
4. Press [▲]/[▼] or rotate [DIAL] knob to select a Channel Group, then press
[OK], the selected Channel Group Icon is displayed on the operating screen.
] to exit the menu screen.
Press [
■

■ Channel Selection

■
◆ Regular Channel
Press [▲]/[▼] to select regular channel.
■
◆ Channel 16
Channel 16 is the distress and safety channel. It is used for establishing initial con-
tact with a station and for emergency communications. Channel 16 is monitored
during both Dualwatch and Tri-watch.
1. Press [16/C] to select Channel 16.
2. Press [◄]/[►] to display [
return to the previously selected channel.
], then press the softkey below [
■
◆ Call Channel
Each regular channel group has a separate leisure-use Call channel (Default
Channel 9). The Call channel is monitored during Tri-watch.
1. Press and hold [16/C] for 1 second to select the Call channel of the selected
channel group. "
2. Press [◄]/[►] to display [
return to the previously selected channel. Press [▲] or [▼] to select channel.
■
◆ Weather Channels
The radio has 10 weather channels.
The radio can automatically detect a weather alert tone on the selected weather
channel while receiving on a regular channel or while scanning.
Selecting a Weather Channel
1. Press softkey [
channel.
• "WX" appears when a weather channel is selected.
], to
• When the WX-Alert is set to ON, "
2. Press [▲]/[▼] to select a Weather channel.
" and Call channel number appear.
], then press the softkey below [
] to select between weather channel and regualr
" is displayed instead of "WX".
], to
9