Dsc Log; Multiple-Task Mode - Oricom MX1100G Instruction Manual

■

■ DSC Log

■
◆ Received DSC Log
The radio saves up to 30 received Distress call messages and 50 received "Other"
call messages in your DSC Log. On the operating screen, "
there is an unread call message; "
message.
1. Press softkey [ ] to display the "RCVD CALL LOG" screen.
NOTE: You can also enter "RCVD CALL LOG" screen by menu operation, steps
as below:
Menu → DSC Log → Received Call Log
2. Press [▲]/[▼] to select "Distress" or "Others", then press [OK] or softkey
].
[
NOTE:
•■Distress: Displays the received Distress call log.
•■Others: Displays the received DSC call log.
3. Press [▲]/[▼] to scroll through the log.
4. Press softkey [ ] to display the received call's information.
32
" is displayed when
" blinks when there is a new received call
→ Press [ ■
]: Returns to the operating screen.
→ Press [ ■
]: Returns to the previous screen.
→ Press [ ■
]: Deletes the selected call log.
NOTE: The confirmation screen is displayed before deleting.
→ Press [ ■
]: Saves the MMSI as an Invididual ID.
■
◆ Transmitted DSC Log
The radio saves up to 30 DSC transmitted calls in your DSC Log.
1. Press [MENU], then press [▲]/[▼] to select "DSC Log", and then press [OK].
2. Press [▲]/[▼] to select "Transmitted Call Log", then press [OK] or softkey
].
[
• The "TX CALL LOG" screen is displayed.
3. Press [▲]/[▼] to scroll through the log.
4. Press softkey [ ] to display the sent call's information.
→ Press [ ■
]: Returns to the operating screen.
→ Press [ ■
]: Returns to the previous screen.
■
→ Press [
]: Deletes the selected call log.
NOTE: The confirmation screen is displayed before deleting.
■
→ Press [
]: Saves the MMSI as an Invididual ID or a Group ID.