The Ecostrad Apex is a versatile infrared heater that provides radiant infrared heat with a soft orange glow. Suitable for wall and ceiling mounting, the Apex with its carbon filament element delivers heat that is strong enough to be effective outdoors but gentle enough for prolonged use in hard-to-heat indoor areas. .
Page 3
M8 Nut with cover Installation: Screw Knob M6*12 The Apex is suitable for wall or ceiling mounting. The instructions below apply to both types of installation. IMPORTANT: The heater must be installed at least 1.8m from the ground and at least 50cm from adjacent surfaces.
Fig. C Fig. B Fig. A Fig. D PARTS DESCRIPTION PART NAME PART NAME Expansion Bolt M6*70 Upper Bracket M8 Nut with cover Mounting Plate Lower Bracket Washer Screw M8*70 Spring Washer Screw Nut M6 Switch Screw Knob M6*12...
Using the Heater 1. Plug the unit into a socket. Make sure the power supply is the same as rated: 220 – 240 V. 2. Switch the heater on and off via the large switch on the left side. Cleaning: Unplug the unit before cleaning.