Table of Contents
Advertisement
4.5 Wiring Length and Gauge Requirements
Maximum length of wire and minimum gauge wire (AWG) from the power panel box to the Base Unit.
When using Remote console configurations recommended cable length (for
RJ45 (8P8C), RJ11 (6P4C) z and 3 wire) is 35' maximum.
No crossover in any of the RJ45 and RJ11 connector cables used for remote
console configuration (i.e,.1 to 1 connections).
Use CAT6 cable for all applicable configurations where RJ45 is used.
Recommemded specification for the wires used in all 3-wire configuration and
wires used between two remote console is "Belden cable PVC 3X22 AWG(Part
#Belden 88463)or equivalent" .
Page 9 of 34
Advertisement
Table of Contents
