hatch X-RAY FS04 Installation And Troubleshooting Manual page 10

4.6 Included System Components
•
As shown by Figure 4 below, the major components and accessories included with a wall mounted Hatch
X-Ray. Verify that all listed items were received for the unit. If any item is missing, take appropriate action
to get the missing parts.
5
Installation of HATCH X-RAY
Installation Procedure Summary
This section provides the instructions necessary to install the Wall Mounted HATCH X-RAY.
Install the HATCH X-RAY wall mount by performing the tasks summarized below and provided
by the following pages.
Unpacking.
Base Unit Installation using Wall Mounting
1. 16 Inch on Center Mount Installation/Two stud mounting.
2. Single stud Mounting (4 x 4 inch post).
3. Base unit mounting with Optional wall plate(If applicable).
Input wiring.
Installing the Straight Arm onto the Base Unit.
Installing the Scissor Arm with Tube Head onto the Straight Arm.
Connecting the Scissor-arm cables.
Remote console Configuration (If applicable).
Performing the operational check procedures.
Options.
Page 10 of 34