ZKTeco FaceDepot-7BL User Manual

Hide thumbs Also See for FaceDepot-7BL:

Quick start manual (13 pages)

Quick start manual (14 pages)

Table Of Contents

Table of Contents

Quick Links

FaceDepot-7BL

User Manual

FaceDepot-7BL

Date: 2020

Doc Version: 1.1

English

Thank you for choosing our product. Please read the instructions carefully

before operation. Follow these instructions to ensure that the product is

functioning properly. The images shown in this manual are for illustrative

purposes only.

P a g e

| 1

For further details, please visit our Company's website

www.zkteco.com.

User Manual

Table of Contents

Summary of Contents for ZKTeco FaceDepot-7BL

Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 2 Copyright © 2020 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Page 3 FaceDepot-7BL User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Page 5 The general information which helps in performing the operations faster The information which is significant Care taken to avoid danger or mistakes The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 6: Table Of Contents
★ ..................................51 INGERPRINT ARAMETERS ......................................52 ACTORY ESET USB U ......................................53 PGRADE PERSONALIZE SETTINGS ........................54 ....................................54 NTERFACE ETTINGS ......................................56 OICE ETTINGS ......................................56 CHEDULES P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 7 DDRESS 14.2 ................................85 DD A EVICE TO THE OFTWARE 14.3 ................................. 86 ERSONNEL ON THE OFTWARE STATEMENT ON THE RIGHT TO PRIVACY ....................87 ECO-FRIENDLY OPERATION ........................88 P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 8: Instructions To Use
The distance between the device and a user whose height is within 1.4m-1.8m is recommended to be 0.5m. Users may slightly move forwards and backwards to improve the quality of facial images captured. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 9 FaceDepot-7BL User Manual Facial expression and standing posture Note: During enrollment and verification, please remain natural with facial expression and standing posture. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 10: Palm Registration
Face Registration Keep the face in the center of the screen during registration. Please face the camera and stay still during face registration. The page looks like the following image: P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 11: Standby Interface
★The punch states can be switched directly by using the screen shortcut keys. Click anywhere on the screen without icons, and six shortcut keys appear, as shown in the figure below: P a g e | 10 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 12 User Manual Press the corresponding shortcut key to select the current attendance state, which is shown in green. Please refer 7.5 Shortcut Key Mappings for specific operations. P a g e | 11 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 13: Virtual Keyboard
The device will automatically distinguish between the palm and the face verification mode. Place the palm in the palm collector area, and the device will automatically detect the palm verification mode. P a g e | 12 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 14 User Manual 1: 1 Palm Verification mode Click the button on the main screen to open 1:1 palm verification mode. Enter the user ID and press [OK]. P a g e | 13 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 15: Fingerprint Verification
The device will enter the fingerprint authentication mode when a user presses his/her finger onto the fingerprint scanner. Please follow the instructions to place your finger on the sensor. For details, please refer 1.1 Finger Positioning. P a g e | 14 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 17 If the user has registered the palm, face, card number and password in addition to his/her fingerprint, and the verification method is set to palm/ fingerprint/ face/ badge/ password verification, the following screen will appear. Select the fingerprint icon to enter fingerprint verification mode. P a g e | 16 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 19: Facial Verification
The 1:N Facial Verification mode compares the acquired facial images with all face data registered in the device. The following is the pop-up prompt box of the comparison result. P a g e | 18 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 20 The 1:1 Facial Verification mode compares the face captured by the camera with the facial template related to the entered user ID. Press on the main interface to open the 1:1 facial verification mode. Enter the user ID and click [OK]. P a g e | 19 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 21 If an employee registers palm, fingerprint, card number and password in addition to the face, the following screen will appear. Select the icon to enter the face verification mode. After successful verification, the prompt "successfully verified" will appear. P a g e | 20 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 22: Card Verification
The 1:N Card Verification mode compares the card number in the card induction area with all the card number data registered in the device; The following is the card verification screen. P a g e | 21 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 23 User ID registered in the device. Press on the main interface to open the 1:1 card verification mode. Enter the user ID and click [OK]. P a g e | 22 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 24 If an employee registers palm, fingerprint, face, and password in addition to the card, the following screen will appear. Select the icon to open the card verification mode. P a g e | 23 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 25: Password Verification
If an employee registers palm, fingerprint, face and card number in addition to the password, the following screen will appear. Select the icon to open the password verification mode. P a g e | 24 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 28: Combined Verification
For example, if a user uses Face Registration but the verification mode is Face + Password, the user verification will be failed. P a g e | 27 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 29: Main Menu
To automatically test whether each module functions properly, including the LCD, voice, Autotest fingerprint sensor, camera, and real-time clock. System Info To view data capacity, device and firmware information of the current device. P a g e | 28 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 30: User Management
The User Management function enables to add and manage users in the device. Adding Users Click User Mgt. on the main menu. Click New User. Register a User ID and Name Enter the User ID and Name. P a g e | 29 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 31 The authentication is based on the authentication method(s) that the super administrator has registered. Please refer 1.7 Verification Method. Register palm Click Palm to enter the palm registration page. Select the palm to be enrolled. P a g e | 30 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 32 User Manual Register fingerprint★ Click Fingerprint to enter the fingerprint registration page. Select the finger to be enrolled. Press the same finger consecutively until the success message appears. P a g e | 31 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 33 User Manual Register face Click Face to open the face registration page. Please face the camera and stay still during face registration. The registration interface is as follows: P a g e | 32 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 34 Note: The password may contain one to eight digits by default. Register ID card★ Press your badge close underneath the fingerprint collector. The badge number registration will be successful. P a g e | 33 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 35 When press the finger corresponding to the duress fingerprint on the sensor and the verification is successful, the system will immediately generate a duress alarm. Similarly, select whether to apply the group time period. P a g e | 34 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 36: Search For Users
Click the search bar on the user list and enter the retrieval keyword (The keyword may be an ID, surname or full name.). The system will search for the users related to the information. P a g e | 35 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 37: Edit Users
Select a user from the list and click Delete to enter the delete user interface. Select the user information to be deleted and click OK. Note: If you select Delete User, all information of the user will be deleted. P a g e | 36 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 38: User Role
Click any option to set a defined role. Click the row of Enable Defined Role to enable this defined role. Click Name and enter the name of the role. P a g e | 37 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 39 FaceDepot-7BL User Manual Click Define User Role to assign privileges to the role. Once the privilege assignment is completed, click Return. P a g e | 38 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 40 User Mgt. > New User > User Role. If no super administrator is registered, the device will prompt "Please enroll super admin first!” after clicking the enable bar. P a g e | 39 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 41: Communication Settings
When the device needs to communicate with a PC over the Ethernet, you need to configure the network settings and ensure that the device and the PC are connected to the same network segment. Click Ethernet on the Comm. Settings interface. P a g e | 40 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 42 Dynamic Host Configuration Protocol, which is to dynamically allocate the IP DHCP addresses for clients via server. Display in Status Bar To set whether to display the network icon on the status bar. P a g e | 41 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 43: Pc Connection
Name domain name when this mode is turned ON. Server Address IP address of the ADMS server. Disable Domain Server Port Port used by the ADMS server. P a g e | 42 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 44: Wiegand Setup
The default value is 1000 microseconds, which can be adjusted within the range Pulse Interval(us) of 200 to 20000 microseconds. ID Type Selects between the User ID and badge number. P a g e | 43 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 46 Pulse Width(us) high-frequency capacitance regularly within a specified time. Pulse Interval(us) The time interval between the pulses. ID Type Selects between the User ID and Badge number. P a g e | 45 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 47: System Settings
You can manually set the date and time and click Confirm to save. Click 24-Hour Time to enable or disable this format and select the date format. P a g e | 46 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 48 Note: For example, the user sets the time of the device (18:35 on March 15, 2019) to 18:30 on January 1, 2020. After restoring the factory settings, the time of the equipment will remain 18:30 on January 1, 2020. P a g e | 47 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 49: Access Logs Setting
Save on failed verification: Photo will be taken and saved for each failed verification. Display User Photo Display the user photo when the user verification is successful. Alphanumeric User Decides whether to support letters in a User ID. P a g e | 48 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 50: Face Parameters
To set the facial template matching time interval as needed. The valid value range is 0 to 9 seconds. Face Parameters Click Face on the System interface. Recommended matching thresholds High Medium Medium High P a g e | 49 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 51 Live Detection Helping to judge whether the visible image comes from an alive body. The Threshold larger the value, the better the visible light anti-spoofing performance. P a g e | 50 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 52: Palm Parameters
Threshold successful. Fingerprint Parameters★ Click Fingerprint on the System interface. Recommended matching thresholds High Medium Medium High P a g e | 51 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 53: Factory Reset
This feature restores the device parameters, such as communication settings and system settings, to factory settings (will not clear registered user data). Click Reset on the System interface. P a g e | 52 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 54: Usb Upgrade
The device's firmware program can be upgraded with the upgrade file in a USB drive. Before conducting this operation, please ensure that the USB drive contains the correct upgrade file and is properly inserted into the device. P a g e | 53 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 55: Personalize Settings
You may customize the interface settings such as voice, bell, punch state options, and shortcut key mappings. Click Personalize on the main menu interface. Interface Settings You can customize the display style of the main interface. Click User Interface on the Personalize interface. P a g e | 54 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 56 Press any key or finger to resume normal working mode. You can disable this function or set a value within 1-999 minutes. Main Screen Style Selects the main screen style according to your personal preference. P a g e | 55 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 57: Voice Settings
Selects whether to enable keypad sounds. Volume Adjusts the volume of the device. The valid range is 0-100. Bell Schedules Click Bell Schedules on the Personalize interface. P a g e | 56 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 58 Delete a bell On the All Bell Schedules interface, tap the bell to be deleted and click Delete, and select Yes to delete the bell. P a g e | 57 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 59: Punch State Options
Fixed Mode: Only the fixed punch state key will be shown. The users cannot change their status by pressing other keys. P a g e | 58 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 60: Shortcut Key Mappings
Click the shortcut key to enter the shortcut key setting interface, and select the function as punch state key or function key (such as new user, all users, etc.), as shown in the figure below: P a g e | 60 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 61 The switch time is used in conjunction with the punch state options. When the punch state mode is set to auto mode, the switch time should be set. Select the switching period and set the switch time every day, as shown in the figure below: P a g e | 61 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 64: Data Management
Deletes the information and attendance logs/access records of all the Delete All Data registered users. Delete Admin Role Removes administrator privileges. Delete Access Control Deletes all the access data. P a g e | 64 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 65 Delete All or Delete by Time Range. If you select Delete by Time Range, you need to set a specific time range to delete all the data with the period. Select Delete by Time Range. Set the time range and clisk OK. P a g e | 65 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 66: Access Control
In default settings, the new users are allocated into the first group with the default group time zone and access combination as “1“ and set to an unlocking state. P a g e | 66 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 68: Time Schedule
Click Time Schedule on the Access Control interface. Click the grey box to search for a time zone. Enter the number of time zone (maximum: 50 zones). P a g e | 68 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 69 FaceDepot-7BL User Manual Click the date on which time zone settings is required. Enter the starting and ending time, and then press OK. P a g e | 69 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 70: Holiday Settings
So, you can set a holiday access time which applies to all the employees, and the user will be able to open the door during the holidays. Click Holidays on the Access Control interface. P a g e | 70 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 71: Access Groups
Each group can set a maximum of three time zones. By default, newly enrolled users are assigned to Access Group 1; they can also be assigned to other access groups. P a g e | 71 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 73 On the All Groups interface, select the access group item to be deleted and click Delete. Click OK to confirm the deletion. The deleted access group is no longer displayed in All Groups. P a g e | 73 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 74: Combined Verification Settings
The door-unlocking combination 3 is set as (09 09 09 09 09), indicating that there are 5 people in this combination; all of which are from AC group 9. P a g e | 74 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 75: Duress Options Settings
When a user uses the password verification method, an alarm signal will be Alarm on Password generated, otherwise, there will be no alarm signal. P a g e | 75 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 76 1 to 999 seconds. Initially, the user sets the 6-digit duress password. When the user enters this Duress Password★ duress password for verification, an alarm signal will be generated. P a g e | 76 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 77: Usb Manager
Downloads the blacklisted photos taken after failed verifications within a specified Blacklist Photo time period or all the pictures taken after failed verifications from the device to a USB drive P a g e | 77 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 78: Upload
Uploads a JPG picture named with a user ID from a USB drive to the device. Before Portrait uploading, you may select Upload Current Picture or Upload All Pictures. P a g e | 78 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 79: Attendance Search
Click Attendance Search on the main menu interface. The process of searching attendance and blacklist photos is similar to search the access records. The following is an example of searching for access records. P a g e | 79 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 80 2. If you want to search the records of all users, Select the time range in which the records you click OK without entering any user ID. want to search for. P a g e | 80 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 81 FaceDepot-7BL User Manual 3. Click the record list in green to view its details. 4. The below figure shows the details of the selected record. P a g e | 81 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 82: Autotest
To test whether the clock works normally and accurately with a stopwatch. Touch Test Clock RTC the screen to start counting and press it again to stop counting. P a g e | 82 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 83: System Information
Displays the Device's name, Serial number, MAC address, Face algorithm version Device Info information, Platform information, and manufacturer details. Firmware Info Displays the firmware version and other version information of the device. P a g e | 83 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 84: Connection To Zkbiosecurity Software
Server Port: Set the Server port of ZKBioSecurity (The default is 8088). In Software Login to ZKBioSecurity software, click System > Communication > Communication Device to set the ADMS service port, as shown in the figure below: P a g e | 84 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 85: Add A Device To The Software
Click Search, and it will prompt [Searching……]. After searching, the list and the total number of access controllers will be displayed. Click Add to add the required device. P a g e | 85 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 86: Add Personnel On The Software
Click Personnel > Person > New to add new personnel. After setting all the parameters, click OK. Note: For other specific operations, please refer ZKBioSecurity User Manual. P a g e | 86 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 87: Statement On The Right To Privacy
Thank you for choosing this hybrid biometric recognition product, which was designed and manufactured by ZKTeco. As a world-renowned provider of core biometric recognition technologies, we are constantly developing and researching new products, and strive to follow the privacy laws of each country in which our products are sold.
Page 88: Eco-Friendly Operation
The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 88 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 89 ZKTeco Industrial Park, No. 26, 188 Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.

ZKTeco FaceDepot-7BL User Manual

1 Instructions to Use

2 Main Menu

3 User Management

4 User Role

5 Communication Settings

6 System Settings

7 Personalize Settings

8 Data Management

9 Access Control

10 Usb Manager

11 Attendance Search

12 Autotest

13 System Information

14 Connection to Zkbiosecurity Software

Statement on the Right to Privacy

Eco-Friendly Operation

Quick Links

Related Manuals for ZKTeco FaceDepot-7BL

Summary of Contents for ZKTeco FaceDepot-7BL

Table of Contents