Page 1
Quick Start Guide FaceDepot-7BL Version: 1.2 Date: May 2020 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
Page 2
Overview Flash Microphone Camera & Palm Collector Network Interface Connection 7" Touch Screen Interface Magnetic Tamper Switch Speaker Connection Interface Reset Button USB Port FP & RFID Reader (Optional) Fingerprint Sensor Card Reading Area...
Device Installation Method 1: Installation on the wall 1.5m ① Attach the mounting template sticker to the wall and drill holes according to the mounting paper. Fix the backplate on the wall using the wall mounting screws. ② Attach the device to the backplate. ③...
Standalone Installation Smoke Alarm Detector Door Sensor Exit Button Lock ZKBioSecurity Card TCP/IP Reader Note: Here, we guide you to connect only the necessary components. If you want more details regarding the connection of SRB, external fingerprint reader and so on, please refer the User Manual.
Lock Relay Connection The system supports Normally Opened Lock and Normally Closed Lock. The NO LOCK (normally opened at power on) is connected with 'NO' and 'COM' terminals; and the NC LOCK (normally closed at power on) is connected with 'NC'and 'COM' terminals.
Barrier Connection Barrier Gate Ethernet Connection ZKBioSecurity RJ 45 Default IP Address: 192.168.1.201 IP Address: 192.168.1.130 Subnet mask: 255.255.255.0 Subnet mask: 255.255.255.0 Click [COMM.] > [Ethernet] > [IP Address], enter the IP address and click [OK]. Note: In LAN, the IP addresses of the server (PC) and the device must be in the same network segment when connecting to the ZKBioSecurity software.
Power Connection 12V DC Recommended power supply 1) 12V ± 10%, at least 3000mA. 2) To share the power with other devices, use a power supply with higher current ratings. User Registration When the Super Administrator is not configured in the device, click to open the menu.
Page 8
Enroll Palm NewUser User ID Name User Role Normal User Palm Fingerprint Face Badge Password User Photo Access Control Role Method 2: User registration on ZKBioSecurity software Please set the IP address and cloud service server address on the device. 1.
Page 9
Step1 Step2 Step3 Step4 2. Click [Personnel] > [Person] > [New] to register a new user in the software. 3. Set the user access levels. 4. Click [Access] > [Device] > [Device Control] > [Synchronize All Data to Devices]. For more details, please refer the ZKBioSecurity User Manual. Method 3: User registration on a mobile phone Once the ZKBioSecurity software is installed, users could enroll via a browser on their mobile phone.
Page 10
2. Click [Personnel] > [Temporary Personnel] > [Review] to view the user details. Ethernet and Cloud Server Settings Click > [COMM.] > [Ethernet] to set the network parameters. If the TCP/IP communication of the device is successful, the icon will be displayed in the top right corner of the standby interface.
Access Control Settings to open the access control management interface and Click > [Access Control] set the relevant parameters of access control.
Page 12
Palm Enrollment Note: 1. Place your palm within 20-50 cm from the device. 2. Place your palm in the palm collection area, such that the palm is placed parallel to the device. 3. Make sure to keep space between your fingers.