Table of Contents
Advertisement
Operation
Press w .
Press q .
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1)
Press as to select [DAYLIGHT VIEW].
2)
Press qw or the <ENTER> button.
f The [DAYLIGHT VIEW] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[OFF]
[1]
[2]
[3]
Note
f [AUTO] cannot be selected when the [PROJECTOR SETUP] menu → [FRONT/REAR] of [PROJECTION METHOD] is set to [REAR].
f The luminance may not be detected correctly when an object is placed on top of the projector, blocking the luminance sensor. In such a
case, this function may not operate properly even if it is set to [AUTO].
f When the [PICTURE] menu → [PICTURE MODE] is set to [DICOM SIM.], the factory default value is [OFF].
[SHARPNESS]
You can adjust the sharpness of the projected image.
1)
Press as to select [SHARPNESS].
2)
Press qw or the <ENTER> button.
f The [SHARPNESS] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w .
Press q .
[NOISE REDUCTION]
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1)
Press as to select [NOISE REDUCTION].
2)
Press qw or the <ENTER> button.
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
[3]
Attention
f When this is set for an input signal with less noise, the image may look different from the original image. In such a case, set it to [OFF].
Chapter 4 Settings — [PICTURE] menu
Adjustment
The intermediate tome becomes brighter.
The intermediate tone becomes darker.
Detects the brightness of the installed environment by the luminance sensor, and automatically
corrects the vividness of the image.
No correction.
Corrects the image to weaken vividness.
Corrects the image to medium vividness.
Corrects the image to high vividness.
Adjustment
Contours become sharper.
Contours become softer.
No correction.
Slightly corrects the noise.
Moderately corrects the noise.
Strongly corrects the noise.
Range of adjustment
-8 - +7
Range of adjustment
0 - +15
ENGLISH - 79
Advertisement
Table of Contents
