Updating The Firmware; Updating The Firmware Via Lan - Panasonic PT-MZ880 Operating Instructions Manual

Updating the firmware

The firmware of the projector can be updated via LAN.
Check the Panasonic website (https://panasonic.net/cns/projector/pass/) for availability of the firmware that can be
updated. Customer can update the firmware if a newer version than the current firmware version is published.
It is necessary to register and log in to PASS
download the firmware.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
For details, visit the Panasonic website (https://panasonic.net/cns/projector/pass/).
r Firmware that can be updated
Main version
r How to confirm the firmware version
Current firmware version can be confirmed by pressing the <STATUS> button on the remote control and displaying
the [STATUS] screen.
The firmware version can also be confirmed in the [PROJECTOR SETUP] menu → [STATUS].
Note
f A LAN cable is required to connect to the network via wired LAN.

Updating the firmware via LAN

Example of network connection
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f A LAN cable is required to connect to the network via wired LAN.
f Connect a LAN cable to the <LAN> terminal or the <DIGITAL LINK/LAN> terminal of the projector.
166 - ENGLISH
Chapter 5 Operations — Updating the firmware
to confirm the availability of the firmware that can be updated or to
*1
STATUS
PROJECTOR TYPE
SERIAL NUMBER
PROJECTOR RUNTIME
LIGHT RUNTIME
CONTINUOUS LIGHTING TIME
MAIN/SUB VERSION
INTAKE AIR TEMP.
EXHAUST AIR TEMP.
LIGHT TEMP. 1
LIGHT TEMP. 2
SELF TEST
SEND E-MAIL
ENTER
CHANGE
Computer
LAN cable (straight)
Switching hub
1/3
PT-MZ880
SW1234567
10h
10h
1h 23m
Main version
1.00 / 1.00
31°C/87°F
31°C/87°F
31°C/87°F
31°C/87°F
NO ERRORS
EXIT
RETURN
Projector
LAN cable (straight)