Technical Information; Using The Pjlink Function - Panasonic PT-MZ880 Operating Instructions Manual

Technical information

Using the PJLink function

The network function of this projector supports the PJLink class 1 and class 2, and setting of the projector or
querying of the projector status can be performed from the computer using the PJLink protocol.
Note
f Setting the password of the administrator account ( x page 137) is required for using the PJLink function of the projector.
PJLink commands
The following table lists the PJLink commands supported by the projector.
f x characters in tables are non-specific characters.
Class Command Control details
1 POWR Power supply control
Power supply status
1 POWR?
query
INPT Input selection
1, 2
INPT? Input selection query
Shutter control/audio
AVMT
output control
1
Shutter status query/
AVMT? audio output status
query
1 ERST? Error status query
Light source status
1 LAMP?
query
1, 2 INST? Input selection list query 11 31 32 33 34
1 NAME? Projector name query
Manufacturer name
1 INF1?
query
1 INF2? Model name query
Other information
1 INF0?
queries
1 CLSS? Class information query
2 SNUM ? Serial number query
Chapter 7 Appendix — Technical information
Parameter/response
string
0
1
0
1
2
11
31
32
33
34
10
11
20
21
30
31
xxxxxx
AAAA X
xxxxx
Panasonic
PT-MZ880
PT-MZ780
PT-MZ680
xxxxx
2
xxxxxxxxx
Remark
Standby
Power on
Standby
Power on
Preparing for switching off the projector
COMPUTER
HDMI1
HDMI2
HDMI3
DIGITAL LINK
Shutter function disabled (shutter: open), mute function disabled
Shutter function enabled (shutter: closed), mute function disabled
Shutter function disabled (shutter: open), mute function disabled
Shutter function disabled (shutter: open), mute function enabled
(muted)
Shutter function disabled (shutter: open), mute function disabled
Shutter function enabled (shutter: closed), mute function enabled
(muted)
Indicates fan errors, and returns
1st byte
0 or 2.
Indicates light source errors, and
2nd byte
returns 0 or 2.
Indicates temperature errors, and
3rd byte
returns 0 - 2.
4th byte Returns 0.
5th byte Returns 0.
Indicates other errors, and
6th byte
returns 0 - 2.
AAAA: Light source runtime
X: 0 = Light source off, 1 = Light source on
―
Returns the name set tin the [NETWORK] menu → [PROJECTOR
NAME].
Returns manufacturer name.
Returns model name.
Returns information such as version number.
Returns class for PJLink.
Returns serial number.
f 0 = No error is
detected
f 1 = Warning
f 2 = Error
ENGLISH - 183