Table of Contents
Advertisement
About your projector
Remote control
r Front
1
2
3
4
5
6
7
8
9
10
11
1
Power < v / b > button
( v : Standby, b : Power on)
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
Sets the projector to projection mode when the power is switched
off (standby mode).
2
Remote control indicator
Blinks if any button in the remote control is pressed.
3
Lens buttons (<FOCUS>, <ZOOM>, <SHIFT>)
Adjusts the focus, zoom, and lens shift of the lens. ( x page 60)
4
<MENU> button/<RETURN> button/<ENTER> button/ asqw
buttons
Used to navigate through the menu screen. ( x page 71)
asqw buttons are also used to enter the password in
[SECURITY] or enter characters.
5
<VOL-> button/<VOL+> button
Adjusts the volume of the audio output. ( x page 64)
6
<DEFAULT> button
Resets the content of the displayed sub-menu to the factory
default. ( x page 72)
7
Input selection buttons (<HDMI 1>, <HDMI 2>, <HDMI 3>,
<COMPUTER>, <DIGITAL LINK>)
Switches the input signal to project. ( x page 59)
8
Number (<0> - <9>) buttons
Used for entering an ID number in a multiple projector
environment or a password.
9
<ON SCREEN> button
Switches the on-screen display function on (display) or off (hide).
( x page 64)
10 <ID ALL> button
Used to simultaneously control all the projectors with a single
remote control in a multiple projector environment. ( x page 31)
11 <ECO> button
Displays the setting screen relating to ECO management.
( x pages 68, 108)
12 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while projecting
the image.
Chapter 1 Preparation — About your projector
12
5
13
14
17
18
19
15
20
16
r Top
21
22
r Bottom
23
24
[PROGRESS] is displayed while in automatic adjustment.
( x page 65)
Also used to cancel operation during digital zoom.
13 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
( x page 67)
14 <CEC> button
Displays the HDMI-CEC operation screen. ( x page 123)
15 <TEST PATTERN> button
Displays the test pattern. ( x page 67)
16 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. ( x page 31)
17 <SCREEN ADJ> button
Used to correct the distortion of the projected image. ( x pages
65, 85)
18 <FREEZE> button
Used when pausing the image and turning off the audio.
( x page 64)
19 <P-TIMER> button
Operates the presentation timer function. ( x page 67)
20 <STATUS> button
Displays the projector information.
21 <D.ZOOM+> button/<D.ZOOM-> button
Enlarges or reduces the image. ( x page 66)
22 <SHUTTER> button
Used when temporarily turning off the image and audio.
( x page 63)
23 <MUTE> button
Used when temporarily turning off the audio. ( x page 63)
24 <ASPECT> button
Switches the aspect ratio of the image. ( x page 67)
25 Remote control signal transmitter
26 Remote control wired terminal
This is a terminal used to connect to the projector via a cable
when the remote control is used as a wired remote control.
( x page 31)
25
26
ENGLISH - 27
Advertisement
Table of Contents
