[Filter Counter] - Panasonic PT-MZ880 Operating Instructions Manual

3) Press as to select item to set in [AUDIO IN SELECT].
[COMPUTER]
[HDMI1]
[HDMI2]
[HDMI3]
[DIGITAL LINK]
4) Press qw to switch the item.
f The items will switch each time you press the button.
f The item is fixed to [AUDIO IN] when [COMPUTER] is selected.
[AUDIO IN]
[HDMI1 AUDIO IN]
[HDMI2 AUDIO IN]
[HDMI3 AUDIO IN]
[DIGITAL LINK AUDIO IN]
*1 Only when the input signal is HDMI1
*2 Only when the input signal is HDMI2
*3 Only when the input signal is HDMI3
*4 Only when the input signal is DIGITAL LINK

[FILTER COUNTER]

Check the runtime of the filter and set the cleaning/replacement cycle of the filter. Also, the runtime of the filter can
be reset.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER RESET]
Setting [TIMER]
If the filter is to be cleaned/replaced periodically, set the cycle in hours. Once the runtime of the filter reaches
the set time, a message prompting to clean/replace the filter [FILTER COUNTER has reached the set time.] is
displayed on the projected image.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1000 H] - [20000 H]
Resetting [FILTER COUNTER]
Reset the runtime of the filter.
1) Press as to select [FILTER COUNTER].
120 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Sets the audio to output when COMPUTER is input.
Sets the audio to output when HDMI1 is input.
Sets the audio to output when HDMI2 is input.
Sets the audio to output when HDMI3 is input.
Sets the audio to output when DIGITAL LINK is input.
Audio connected to the <AUDIO IN> terminal is output during projection of image from the set input
terminal.
*1 Audio input to HDMI1 is output.
Audio input to HDMI2 is output.
*2
*3 Audio input to HDMI3 is output.
*4 Audio input to DIGITAL LINK is output.
Displays the runtime of the filter.
Sets the cleaning/replacement cycle of the filter.
Resets the runtime of the filter.
Select this item when a message is not to be displayed.
Select this item when a message is to be displayed. The cleaning/replacement cycle of the filter can
be set in 1 000 hour intervals.