Technical Information; Pjlink Protocol - Panasonic PT-VW430EA Operating Instructions Manual

Technical Information

PJLink protocol

The network function of the projector supports PJLink class 1, and the PJLink protocol can be used to perform
projector setting and projector status query operations from a computer.
Control commands
J
The following table lists the PJLink protocol commands that can be used to control the projector.
Command Control details
POWR Power supply control
POWR ? Power supply status query
INPT Input selection
INPT ? Input selection query
AVMT AV MUTE control
AVMT ? AV MUTE status query
ERST ? Error status query
Lamp status query
LAMP ?
Input selection list query
INST ?
NAME ? Projector name query
INF1 ? Manufacturer name query
INF2 ? Model name query
INF0 ? Other information query
CLSS ? Class information query
PJLink security authorization
J
When using PJLink with security authorization, either o f the password set for administrator privileges and the
password set for user privileges with Web browser control can be used as the password for PJLink (
When using PJLink without security authorization, set use without the password for administrator privileges and
the password for user privileges of Web browser control.
For specifications regarding PJLink, refer to the Japan Business Machine and Information System
Industries Association website.
http://pjlink.jbmia.or.jp/english/
Parameters
0 = Standby
1 = Power ON
Parameters
0 = Standby 1 = Power ON
2 = Cool-down in progress 3=Warm-up in profress
Parameters
11 = RGB 1 12 = RGB 2
21 = VIDEO 22 = S-VIDEO
31 = HDMI
Parameters
30 = AV MUTE mode off
31 = AV MUTE mode on
Parameters
1st byte : Indicates fan errors, range 0 – 2
2nd byte : Indicates lamp errors, range 0 – 2
3rd byte : Indicates temperature errors, range 0 – 2
4th byte : Fixed at 0
5th byte : Indicates filter errors, range 0 – 2
6th byte : Indicates other errors, range 0 – 2
Definitions for each value from 0 to 2 are as follows.
0 = No error known 1 = Warning
Parameters
1st digits (1 – 5 digits) : Lamp cumulative operating time
2nd digit : 0 = Lamp off, 1 = Lamp on
The followings are returned as parameters.
"11, 12, 13, 21, 22, 23, 31"
The name set for [Projector name] in [Network] is returned.
"Panasonic" is returned.
Answer the model name with "VX500", "VX501" or "VW430".
Information such as version number is returned.
"1" is returned.
Technical Information
Notes
13 = SCART
23 = COMPONENT
2 = Error
Æ
ENGLISH -
page 74).
85