Porter functions
The functions described in this chapter are only available in systems with a porter
switchboard/porter desk.
Notifi cation of call by the porter
CONTACT ME
Request to be called back by the porter
CONTACT ME
Alarm signalling
ALARM!
Open-gate function/status
When the LED
that the porter wishes to be called back.
The LED turns off when communicating
with the porter.
If properly confi gured, press the button
to send a message to the porter that
you wish to be called back.
The activation of an alarm contact
connected to the dedicated input of the
receiver, activates the sending of a signal
to the porter and this is notifi ed on the
receiver through an intermittent acoustic
signal for about 10 seconds.
Where allowed by the system and correctly
confi gured, you can send an operator
opening/closing command by pressing and
holding the
indicates the operator status.
☞
The function must be activated on the
receiver when the call is being associated
during system programming
turns on, it indicates
key. The LED next to it