Standard Functions - CAME PLX A User Manual

The function of this button depends on the confi guration set during installation.
If the button is confi gured as an INTERCOM, it will temporarily enable the
SECOND FUNCTION, allowing INTERCOM calls 4 to 6 to be activated.
☞ When the second function is active, the white LEDs on the buttons 1,2,3,4
will fl ash. The function remains active for approximately 10 seconds and can be
disabled by pressing the button again.
If the button is confi gured as an AUX, it will serve as AUX 5.
To enable and disable the AUTOMATIC DOOR RELEASE function, press and hold
the button for more than 3 seconds.
☞This function is available only when the line is free.
LED key
On: AUTOMATIC DOOR RELEASE function enabled.
Off : AUTOMATIC DOOR RELEASE function disabled.

Standard functions

Call in progress.
Communication activated.
Open the door for the calling entry panel.
Answer a call.
End the call.