2. Getting Started
2.1
Baby Unit Power Supply
1. Connect the micro USB plug of the power adapter to the Baby Unit
(camera) and the other end to a suitable electrical outlet.
NOTE
Only use the enclosed Power Adapter (5V DC / 1500mA).
2. Slide the POWER ON/OFF switch to the ON position to turn the Baby Unit
on.
3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby
Unit off.
IMPORTANT
The Baby Unit is able to operate without AC power for up to 3 hours with the
support of the built-in rechargeable battery (Ni-MH battery 3.6 V, 900mAh).
Please charge the unit for at least 16 hours before first time use. The battery is
not a user-accessible item. Please contact the helpline if you think it needs
replacing.
Getting Started
11