Camera Control; Add (Pair) A Camera; View A Camera - Motorola MBP855CONNECT User Manual

4. If an alarm time is selected, the Parent Unit will beep for about 1 minute
after every 6, 4 or 2 hour period, and the
stop the alarm.
4.6

Camera Control

4.6.1

Add (pair) a camera

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the delete/
3. Press the + UP button or - DOWN button to select
O button to confirm.
4. Camera
button to select the desired Camera, and press the O button to start
searching for a camera unit.
Note: Models with more than one camera will have * next to each paired
camera. If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen.
The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2

View a camera

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the delete/
3. Press the + UP button or - DOWN button to select
the O button to confirm.
4. Camera
button to select the desired camera, and press the O button to view the
picture from that camera.
Note: Only camera locations with a * can be selected.
18
add/ view/
+
will pop up, press the + UP button or - DOWN
add/ view/
+
will pop up. Press the + UP button or - DOWN
will flash. Press any button to
is highlighted, and
scan menu will pop up.
+
is highlighted, and
scan menu will pop up.
add, and press the
view, and press
Parent Unit Menu Options