Table of Contents
Advertisement
Service Manual
8.5 Installation and Disassembly of heat Discharge Pipe
A. Install heat discharge pipe
(1) Rotate joint A and joint B clockwise into the two ends of heat discharge pipe.(As show in Fig.10)
(2) Insert joint A of heat discharge pipe (the side with "TOP" is upwards) into the groove until you hear a sound.(As shown in Fig.11)
(3) Lead the exhaust hose outdoors.(As shown in Fig.12)
(4) Slide and open the exhaust cover on the window panel, and attach the window adapter. (Optional) (As shown in Fig.13)
clockwise
joint A
heat discharge pipe
Fig.12
Note of Install heat discharge pipe
In order to improve cooling efficiency, the heat discharge pipe should be as short as possible and flat without curve to ensure smooth
heat discharge.(As shown in Fig.13)
●The length of the heat discharge pipe is less than 1m. It is recommended to use it with shortest length.
●The length of the heat discharge pipe is less than 1m. It is recommended to use it with shortest length.(As shown in Fig.14)
correct
correct
Maintenance
clockwise
joint B+C
Fig.10
correct
wrong
Fig.13
clasp
the side with "TOP" is upwards
groove
Fig.11
Fig.13
Fig.14
31
Advertisement
Table of Contents
