Table of Contents
Advertisement
Quick Links
Thank you for your purchase of our new SS3 Type MS Foglight Kit. CAD-designed to use existing
mounting points, this kit is compatible with the Jeep JL Wrangler and JT Gladiator Sport. Basic
Installation Instructions are included below. Please contact us if you have any questions.
Left and Right Sides
1. Attach the bracket to the pod loosely, using one
screw on each side. These screws will also determine
the aim of your SS3 pods. See the diagrams above
and to the right. Make sure the bracket is in
the correct orientation.
PAGE 1
SS
Type MS Foglight Kit
Factory
Hardware
(314) 205-3033
3" LED Pod
3
TOP
BOTTOM
See back for further instructions.
WWW.DIODEDYNAMICS.COM
Advertisement
Table of Contents
Related Manuals for Diode Dynamics Stage Series SS3
Summary of Contents for Diode Dynamics Stage Series SS3
- Page 1 3” LED Pod Type MS Foglight Kit Thank you for your purchase of our new SS3 Type MS Foglight Kit. CAD-designed to use existing mounting points, this kit is compatible with the Jeep JL Wrangler and JT Gladiator Sport. Basic installation instructions are included below.
- Page 2 8. Reinstall the fog light covers and splash guard to complete the installation. Please contact Diode Dynamics should you have any questions about the installation or wiring process, at 314-205-3033 (9a-5p CST) or contact@diodedynamics.com. Please contact Diode Dynamics should you have any questions about the installation This installation guide is for the following SKUs: or wiring process, at 314-205-3033 (9a-5p CST) or contact@diodedynamics.com.
Need help?
Do you have a question about the Stage Series SS3 and is the answer not in the manual?
Questions and answers