Advertisement
Table of Contents
Measure lamp height to center
Please contact Diode Dynamics should you have any questions about the installation
or wiring process, at 314-205-3033 (10a-5p CST) or contact@diodedynamics.com.
NEED MORE HELP?
Scan the QR code to link to our YouTube Channel!
We continuously bring in vehicles to our testing garage in order to
create step-by-step videos to walk you through the installation process
on your specific vehicle. Scan the QR code to see all our installation
videos. Be sure to subscribe to our channel to stay up-to-date on the
newest products and videos from Diode Dynamics!
This installation guide is for the following SKUs:
DD6576 Worklight SS3 Sport Type MS Kit White SAE Driving
3 YEAR
DD6577 Worklight SS3 Sport Type MS Kit White SAE Fog
WARRANTY
DD6578 Worklight SS3 Sport Type MS Kit Yellow SAE Fog
DD6579 Worklight SS3 Pro Type MS Kit White SAE Driving
8
100% SATISFACTION
GUARANTEE
year
w arranty
PAGE 4
PP0081
PP0132C
13. Aim your SS3 pods on each side, so that
the top of the beam pattern is on the
cutoff line mark.
14. Tighten the 5/32" allen bolts back down.
15. Reinstall the fog light covers and splash
guard to complete the installation.
Four (4) inches
25 feet
DD6580 Worklight SS3 Pro Type MS Kit White SAE Fog
DD6581 Worklight SS3 Pro Type MS Kit Yellow SAE Fog
DD6706 Worklight SS3 Max Type MS Kit White SAE Fog
DD6707 Worklight SS3 Max Type MS Kit Yellow SAE Fog
Level
Top of
Beam
Thank you for your purchase of our new SS3 Type MS Foglight Kit. CAD-designed to use existing
mounting points, this kit is compatible with the Jeep JL Wrangler and JT Gladiator Sport. Basic
installation instructions are included below. Please contact us if you have any questions.
Left and Right Sides
1. Attach the bracket to the pod loosely, using one screw
on each side. These screws will also determine the aim of
your SS3 pods. See the diagrams above and to the right.
Make sure the bracket is in the correct orientation.
PP0170
SS
Type MS Foglight Kit
Factory
Hardware
See inside for further instructions.
(314) 205-3033
WWW.DIODEDYNAMICS.COM
3" LED Pod
3
TOP
BOTTOM
PAGE 1
Advertisement
Table of Contents
Related Manuals for Diode Dynamics STAGE Series
Summary of Contents for Diode Dynamics STAGE Series
- Page 1 Thank you for your purchase of our new SS3 Type MS Foglight Kit. CAD-designed to use existing Please contact Diode Dynamics should you have any questions about the installation mounting points, this kit is compatible with the Jeep JL Wrangler and JT Gladiator Sport. Basic or wiring process, at 314-205-3033 (10a-5p CST) or contact@diodedynamics.com.
- Page 2 Aiming Instructions 2. Using a trim removal tool, remove the eight push rivets along the front of the splash guard. We recommend prying on both accessible sides 8. Park your vehicle 25 feet away from a wall of the push rivets at the same time due to their or garage door on a level surface.
Need help?
Do you have a question about the STAGE Series and is the answer not in the manual?
Questions and answers