Diode Dynamics STAGE Series Quick Start Manual

Thank you for your purchase of our new SS3 Type GM Foglight Kit. CAD-designed to use existing
mounting points, this kit is compatible with many Chevy, GMC, Ford, and Pontiac models. Basic
installation instructions are included below. Please contact us if you have any questions.
Left and Right Sides
1. Attach the bracket to the pod, using one screw on
each side. These screws will also determine the aim
of your SS3 pods. Adjust the angle of the light in the
bracket, then tighten down these screws. See diagrams
above and to the right. Make sure the bracket is in the
correct orientation.
PAGE 1
SS
3" LED Pod
3
Type GM Foglight Kit
Factory Fog Lamp Assembly
Retainer Clips
BOTTOM
See back for further instructions.
TOP