Safety And Work Symbols; Important Notes For The User - Pfaff EcoDrive P40 ED Instruction Manual

Safety
●
●
●
1

Safety and work symbols

.03
1

Important notes for the user

.04
●
●
●
●
●
For further information please contact your PFAFF agency.
6
Work is not permitted on parts and equipment which are connected to the power supply!
Exceptions to this are contained in the regulations EN 50110.
Repair work and special maintenance work must only be carried out by specialists or
appropriately trained personnel!
Only spare parts which have been approved by us are to be used for repairs! We express-
ly point out that any replacement parts or accessories not supplied by us have not been
tested and approved by us. The installation and /or use of such products may result in
negative changes to the constructional characteristics of the machine. We are not liable
for any damage caused by non-original parts.
Danger!
Points for particular attention
Danger of injury to operating or technical staff!
Dangerous voltage!
Danger of death for operating and technical staff!
Note, information
This instruction manual belongs to the equipment of the sewing machine drive and must
be available to the operating staff at all times. The instruction manual must be read before
the equipment is operated for the fi rst time.
Both operating and technical staff must be instructed on the safety devices of the sewing
machine drive and on safe working methods.
It is the duty of the user to operate the sewing machine drive in perfect running order
only.
The user must ensure that none of the safety devices are removed or put out of working
order.
The user must ensure that only authorized persons work on the sewing machine drive.