10
Hardware-test
.02
The hardware test is a test program which, with the aid of the control panel, makes it possi-
ble to check various components of the control unit and the machine installation. The check
involves the test of seven test blocks.
●
Switch on the machine.
●
Select service level "C", see Chapter
●
Select parameter
test block appears on the display.
A
●
Further test blocks can be called up by pressing the plus-minus keys "A".
●
The relevant inputs or outputs are selected by pressing the plus-minus keys "B".
10
Test block 1 – inputs
.02.01
Input
Input number
797 and set at "ON" by pressing the relevant plus-minus key. The fi rst
E1
X5:
5
0
Input status
0 = switch open
1 = switch closed
Contact number
E1
X5:
5
0
Connector
The allocation of the functions of the inputs displayed is shown in the general
plan of Chapter 10.03 Connection plan for connector X5.
9.01.02 Selecting the user level.
B
Service functions
57