Set Bobbin Thread Control By Stitch Counting; Bobbin Thread Monitoring On Sub-Class -926/06 (Optional) - Pfaff EcoDrive P40 ED Instruction Manual

Sewing
8

Set bobbin thread control by stitch counting

.01.03
●
●
2x
●
●
Example:
●
●
8 Bobbin thread monitoring on sub-class -926/06
.01.04
20
Switch on the machine.
Press the "TE/Speed" key twice to call up the parameter input function (LED on).
No
A 101
Press the relevant plus-minus keys to select parameter
No
A 760
Set the number of remaining stitches, which can still be sewn after recognition through
the bobbin thread monitoring function, by pressing the relevant plus-minus key. The
selected value is multiplied by 200, in this way showing the number of stitches.
Display 5(x 200) = 1000 stitches. The setting depends, among other things, on the thread
size.
Press the "TE/speed" key to take over the value and change to the manual sewing mode.
The remaining bobbin thread counter can only be used, if parameter 660 is set
at value "1" or "2".
Setting the bobbin thread monitor function, see Instruction Manual -926/06
(part no. 296-12-18 770/001).
VAL
ON
VAL
5
760.
(optional)