8
Example of a seam program input by entering the number of stitches
.02.01
Example: Attaching a label
Seam sector 4
1.
Program number 1, four seam sectors
2.
Seam sector 1 with 20 stitches,
Functions: Start bartack, programmed stop and sewing foot raised at end of seam
sector,
3.
Seam sector 2 with 10 stitches,
Functions: Programmed stop and sewing foot raised at end of seam sector,
4.
Seam sector 3 with 20 stitches,
Functions: Programmed stop and sewing foot raised at end of seam sector,
5.
Seam sector 4 with 10 stitches,
Functions: End bartack, programmed stop and sewing foot raised at end of seam sector
and thread trimming.
●
Switch on the machine.
●
Activate the programmed sewing mode (LED on):
●
Using the relevant plus-minus key, select the program number, e.g. "
●
Call up the menu for entering the seam sectors and the program link.
Seam sector 1
Seam program 1
Seam sector 3
1
1
20
Sewing
Seam sector 2
1".
23