Pfaff EcoDrive P40 ED Instruction Manual page 24

Sewing
●
●
●
2x
●
●
●
●
●
●
24
1000 4
Using the relevant plus-minus key, select the number of seam sectors, e.g. "
Using the relevant plus-minus key, select the linked seam program, e.g. "
link is to take place.
Call up the menu for entering the seam sector and the corresponding number of stitches.
1 1
Using the relevant plus-minus key, select the seam sector "
Using the relevant plus-minus key, enter the number of stitches for the seam sector, e.g.
"20".
Activate the start bartacks (LED on).
Switch on the "programmed sewing stop" function (LED on).
Switch on the "foot position raised at end of seam sector" function (LED on).
Switch on the stitch counting function (LED on).
0
20
4".
0", if no program
1".