Service functions
10
Test block 6 – thread monitor
.02.06
Thread monitor
●
10
Test block 7 – data transfer
.02.07
B+
●
●
60
FW
0%
Analogue value of thread monitor
The analogue value of the thread monitor is shown here in %.
update Data
B+ ->QP
D+ QP->
If the plus key "B+" is pressed, all data from the control unit is transferred to the program-
ming device.
If the plus key "D+" is pressed, all data from the programming device is transferred to the
control unit.
Before the data transfer, the Instruction Manual of the programming device
must be observed!
(only on subclass -926/06)
D+