Table of Contents
Advertisement
Control elements
6
Symbols on the display
.02.01
In addition to texts and set values, the following symbols are shown on the display. The sym-
bols only appear in the programmed sewing mode, see Chapter 8.02 Programmed Sewing.
6
Plus-minus keys
.02.02
The relevant plus-minus keys are used for the selection and alteration of the set values con-
cerned (e.g. when entering bartack stitches). In this case the relevant plus or minus key
is pressed and held while the set value shown above the key slowly changes. If the key is
pressed longer, the set value changes more quickly.
6
Function keys
.02.03
The activated function is always shown by the relevant illuminated LED.
Description of the individual functions:
Start bartack
●
End bartack
●
14
Current program number
Current seam sector
Number of stitches in current seam sector
Maximum speed in current seam sector
Number of seam sectors in current seam program
Program number of the seam program to be linked
A
B
C
3
3
3
If this key is pressed, the securing stitches at the beginning of the seam (start bartacks)
are switched on or off. The number of forward stitches (A) or reverse stitches (B) for the
start bartack can be changed in each case by pressing the +/- key underneath. To change
from double tacks to single tacks set the forward stitches (A) at zero.
If this key is pressed, the securing stitches at the end of the seam (end bartacks) are
switched on or off. The number of reverse stitches (C) or forward stitches (D) can be
changed in each case by pressing the +/- key underneath. To change from double tacks to
single tacks set the forward stitches (D) at zero.
D
3
Hide quick links:
Advertisement
Table of Contents
