Control elements
TE/Speed
●
●
●
●
Scroll
●
PM / Operating mode
●
F1
No function at present.
F2
No function at present..
F3
No function at present.
F4 / reset piece counter
If this key is pressed, the piece counter is reset, when the piece counter menu is called up,
see Chapter 8.01.02 Piece counter.
16
If this key is pressed once while in the manual sewing mode, the menu for entering the
maximum speed is selected. If no input is made within 5 seconds, the sewing mode is
selected again.
If this key is pressed twice (within 5 seconds) while in the manual sewing mode, the ma-
chine changes to the parameter input function.
If this key is pressed while in the parameter input function, the altered set values are sto-
red and the sewing mode is called up.
If this key is pressed three times (within 5 seconds) while in the manual sewing mode,
the piece counter display is called up (only if parameter 180 is set at "ON").
Press this key to scroll through the sub-menus of the program.
If this key is pressed, the machine switches between manual and programmed sewing. If
the LED is illuminated, programmed sewing is active.