Bobbin Winder - Pfaff 333-712/02 Adjustment Manual

Adjustment
13

Bobbin winder

.04.09
O Adjust the drive wheel 1 (screws 2) according to rule1.
O Adjust the stud 3 (screws 4) according to rule 2.
14
Rule
1. When the bobbin winder is switched on, the bobbin winder spindle should be moved
easily; when the bobbin winder is switched off, the friction wheel 5 must not touch
the drive wheel 1.
2. The bobbin winder should switch off automatically when the fill amount is still around
1 mm from the edge of the bobbin.
4
3
1
2
Fig. 13 - 09
5