Table of Contents
Advertisement
Device Firmware
An I/O that is using outdated or incompatible firmware will not work properly in a SoundGrid network until its firmware is
updated. The color of the FW button in a device slot indicates the current firmware status.
SoundGrid Studio
If a device requires updated firmware, click on the FW button to start a hardware scan. Do not disconnect the device or
turn off the computer before Done appears. Once the update is ready, turn the device off and on to reset.
Identify a Device on the SoundGrid Network
SoundGrid Studio
12
Grey
Blue
Red
SoundGrid QRec
Click on the ID button to activate a hard-to-miss LED on the panel of the
corresponding hardware device. You can also activate the LED from the top
bar of the device's control panel.
SoundGrid QRec
Compatible firmware
Compatible firmware, but a newer version exists
Firmware not compatible and must be updated in order to use
DiGiGrid MGR / User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the DiGiGrid MGR and is the answer not in the manual?
Questions and answers